I mounted the igniter 123 on my new engine with the standard coil (3ohm) and silicone / carbon wire. I had to remove and replace the classic igniter because I had too much cold start problems and even failures wheelchair until the engine is hot. With conventional igniter, I have no problem. With the...

Hello thank's for your answer. I want to résume what I want to do. I have a fulvia sport 1.3 S with old engine 813.303 and with carb solex c35 phh- e2. The car goes well without problems. I have prepared a new motor as origin exept hc pistons from CPS. and I want to have a spare carbs révised to tha...

Par curiosité, j'ai encore fait un petit essai. parceque les carbu PHH-E2 sont monté sur la voiture, j'ai remplacé les needle valves (1.3) par des 1.1 (fournis dans le kit de réparation) pour essai...et surprise la voiture ne fonctionne plus bien: trous à l'accélération. Ce n'est pas le même problèm...

because _ carburetor PHH -E2 are mounted on the car, I replaced the needle valves (1.3) by 1.1 (provided in the repair kit) to test ... and surprise the car no longer works well: holes acceleration. This is not the same problem with other carburetor  (PHH19). So I handed over the original 1.3. Concl...

Bonjour, merci de votre réponse. J'ai acheté ma fulvia sport S2 avec un moteur usagé équipée de solex PHH-E2. Je les ai nettoyé et ai roulé depuis plusieurs années sans problème. J'ai eu l'opportunité d'acheté des carbus d'occasion PHH19 et PHH23 que j'ai rénové moi même en changeant les joints et n...

Thank's for your answers

Hello,
Thank's for your answer.
110 on the new parts from the repared kit and 11 (a big 1 and a small 1) on the two set PHH 23 and PHH 19. I have not open the PHH E2 to chek the N° because the are monted on the car.
On the RT I can see 1.3 on many N° of PHH and some N° used 1.1 then ?

Hello,
I changed with a new repair kit without result...and same problem with the 2 sets tested (PHH19, PHH23).
I do not know how to control the level vessel?
a doc said level set by the thickness of the washer.
another: level 19 mm but how to measure?

Thanks for your answer.
I visually compare the jets with the entry of PHH-E2 carburetors that works well and a set (PHH23) wrong.
There seem to have too much gasoline PHH23. We see a mist and fuel droplets along the tube.
On the good carb only a gasoline fog.

I own a Fulvia Sport S 2 from 1972 Used 818,303 standard engine without problem. It is equipped with carburetor Solex C35 PHH-E2 (latest version cleared) .The car works great as this. I had the opportunity to purchase used Solex carburetors of C35 PHH19 and a set of PHH23. I have reviewed these carb...