Aldo Broverone's Opinion on Fulvia Sport

racing · Unread post by **racing** » 11 Nov 2010, 08:18

You are right with the socks on. They are only open for the picture. The is normaly a cover on it.

Like they use on formular cars. The add. pic.showes it on the car of the "old" solex carb owner .

Andreas

racing · Unread post by **racing** » 17 Nov 2010, 11:37

a little bit boring here today

new pic´s

Andreas

racing · Unread post by **racing** » 22 Nov 2010, 10:42

new update from the week end ( was very cold )

Charles · Unread post by **Charles** » 22 Nov 2010, 12:35

As said by others: Nice work Andreas! I'm really enjoying your progress and craftsmanship. I've got a late series 1 Sport 1,3 (chassis #818.332.2183) thus steel panels with alu doors and bonnet. It is quite sound at the moment. Given the underlaying construction however, which in effect is a huge corrosion trap, I,ll expect to do a simillar project like you in about 10 years.

Just for curiousity: What material is used for your hatchback door and your spare wheel door? It's wide spread "believed" that for series 1 and 1,5 all moving parts are made of alluminium. I've never seen both back doors in aluminium though, not even on aluminium cars. Also the part table doesn't state different matrials used.

racing · Unread post by **racing** » 22 Nov 2010, 13:42

the hatchback and the spare wheel door´s are in steel. ( strange )

spare wheel door enclose ( not ready but with out paint )

lucasgeheniau · Unread post by **lucasgeheniau** » 22 Nov 2010, 23:42

I have 3 Zagato's with spare wheel doors, one car all peraluman, but the door is old rusty iron.
So I have reason to believe that the back doors were never in Aluminium.

fulvia a.i. · Unread post by **fulvia a.i.** » 23 Nov 2010, 23:52

more nice fotos of Xpensive fulvia parts; just-investments & just-posted in Viva Lancia DE, from Monte Carlo, Brave Lad

Fulvia Body is in paint shop; should be done soon ! MonteCarlo may be in a Nerve-Clinic B)

Charles · Unread post by **Charles** » 13 Dec 2010, 09:14

Hi Andreas,

Any progress from last "report" or was it too cold to work on your zagato?
I'm really enjoying your updates.

Cheers,

Charles

racing · Unread post by **racing** » 13 Dec 2010, 09:37

You are right, it´s to cold. So the progress is slower as i wish.

But i have worked on the subframe. Complett blasted and strengthen the bad end´s
Enclose you will see it on the pic´s ( done at - 5°C )

Regards Andreas

racing · Unread post by **racing** » 13 Dec 2010, 13:04

some old pic´s but i think usefull

Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport

Re: Aldo Broverone's Opinion on Fulvia Sport