Clutch cover 2000

[william]

Does anyone know if the clutchcover for the 2000 (flavia) engine is interchangable with another more readily available (lancia/fiat) product? Like for example the Fulvia SII clutch us the same as lancia beta 1600 and Fiat uno.

[Colin]

William, same as Beta 1800. Regards - Colin.

[william]

Which in turn is the same as the beta 2L right?

[Colin]

I believe not the same as 2.0

[william]

Just had the opurtunity to compaire both 1800 and 2000 covers and they look exactly the same. the only difference i can come up with is the 2000 beta cover is stronger. I opted for the stronger 2000 as my Flavia 2000 engine is modified a bit.
Thanks again. Next problem is finding a new clutch release bearing. Any tips?

[Bert Ewalds]

For the Lancia 2000, models 820.210/211/230/231 the correct bearing should be SKF 616524

[william vd Sman]

I've checked the net and found out that that nr is not carried by SKF for years. Could it be the same as Fulvia?

[Bert Ewalds]

Not very likely, the SKF cross reference list gives different numbers for the Fulvia bearings

I bought mine (Flavia 1800 Coupe) from Cavalitto, few years ago

Bert

[Jens]

Dear William,
according to Sachs, Beta 1800 and a lot of other Lancia and Fiat models use the same clutch pressure plate. Beta 2000 will not fit due to larger dia 215 mm in sted of 200.
Take a look at the sachs web site for more info: http://webcat.zf-trading.com/index.asp?SPR=4.
Just click on part no for crossref