Hello,
I can't find the ecu - its not at the right hand end of the dashboard like the Turbo versions.
Leo Capaldi (lost inside a Thema)
Where is the ECU? On a 1990 16V (non turbo)
Re: Where is the ECU? On a 1990 16V (non turbo)
Hi Leo,
I own a 1991 16V, so I suppose it's the same. It's equipped with Bosch LE 3.2 Jetronic, and the ECU is fitted on the airflow-meter. If you look at it, it has a rectangular cover on top with a 15 pin connector.
Unlock the connector and remove the 4 screws, then you can take the ECU off, it is inside the cover.
Hope you didn't got stuck behind that engine
Pol (Looking under the bonnet at the ECU)
I own a 1991 16V, so I suppose it's the same. It's equipped with Bosch LE 3.2 Jetronic, and the ECU is fitted on the airflow-meter. If you look at it, it has a rectangular cover on top with a 15 pin connector.
Unlock the connector and remove the 4 screws, then you can take the ECU off, it is inside the cover.
Hope you didn't got stuck behind that engine

Pol (Looking under the bonnet at the ECU)
Re: Where is the ECU? On a 1990 16V (non turbo)
Thanks Pol - that explains a lot. The guy whose car it is had removed the trunking and airflow meter before I got involved!
Thanks again, best regards, see you at the LMC AGM???
Leo
Thanks again, best regards, see you at the LMC AGM???
Leo
LMC AGM
Hello again Pol,
I just replied to your message via email, but earlier I asked if you were in Scotland but it looks like you are in Belgium.
Anyway, the LMC AGM is a fantastic opportunity to wear your best anorak and talk Lancia. Its the Lancia Motor Club Annual general meeting and its this weekend 11/12th July near Oxford in England.
Best regards, Leo
I just replied to your message via email, but earlier I asked if you were in Scotland but it looks like you are in Belgium.
Anyway, the LMC AGM is a fantastic opportunity to wear your best anorak and talk Lancia. Its the Lancia Motor Club Annual general meeting and its this weekend 11/12th July near Oxford in England.
Best regards, Leo