Search found 44 matches

by lancia7550
24 Nov 2021, 08:24
Forum: NL85 Fulvia, Flavia, Flaminia, Stratos
Topic: Aktiemodel Fulvia coupe ?
Replies: 1
Views: 190

Re: Aktiemodel Fulvia coupe ?

Ik vond deze fabrieksfoto
by lancia7550
23 Nov 2021, 19:23
Forum: 65 Fulvia
Topic: Series 1 starter questions
Replies: 4
Views: 128

Re: Series 1 starter questions

Thanks you, I will take the starter out and clean/ lubricate bendix to see if it fixes it.
by lancia7550
14 Nov 2021, 01:32
Forum: 65 Fulvia
Topic: Series 1 starter questions
Replies: 4
Views: 128

Re: Series 1 starter questions

Pics of Bosch starter
by lancia7550
14 Nov 2021, 01:28
Forum: 65 Fulvia
Topic: Series 1 starter questions
Replies: 4
Views: 128

Series 1 starter questions

My Series 1 Fulvia coupe is developing an intermittent issue where the starter would keep running after I release the key. Plan is to start by cleaning/ sericing the ignition switch and lubricating it with some graphite powder. If this fails, can it be due to the starter relay failing? Also looking ...
by lancia7550
16 Oct 2021, 05:49
Forum: 65 Fulvia
Topic: S1 headlight units - are LHD and RHD the same?
Replies: 2
Views: 141

S1 headlight units - are LHD and RHD the same?

One of my outer headlights on my S1 coupe (RHD) turned a bit yellow so I am looking to replace it (or both sides) with another original Siem unit. There are a few new ones available on ebay etc in Europe but I am not sure if LHD and RHD units are the same (the light only, not the "cup"). I...
by lancia7550
27 Jun 2021, 10:38
Forum: 65 Fulvia
Topic: Sump Capacity
Replies: 4
Views: 747

Re: Sump Capacity

I once had a Fulvia dipstick where the cap part came loose and could slide along the dipstick. That yielded some confusing measurements! Welded it back in place where the old weld mark was and all was good again.
by lancia7550
10 Mar 2021, 09:28
Forum: 65 Fulvia
Topic: Float level 1.3 Fulvia
Replies: 8
Views: 1032

Re: Float level 1.3 Fulvia

The one carb's float level was sitting at 19mm and the other at 21mm, hence why they appeared to be quite different to the eye. Not too bad though and with a bit of effort got them both to exactly 20mm. Just another question after checking the jets over again, what is the third jet at the bottom of ...
by lancia7550
09 Mar 2021, 07:11
Forum: 65 Fulvia
Topic: Float level 1.3 Fulvia
Replies: 8
Views: 1032

Re: Float level 1.3 Fulvia

Thank you, that is great information. Yes, the car had a oil bath filter since new, but I have removed it and fitted a standard air filter. When I checked the jets I noticed that there should be different jets for the different air filters, but the ones fitted were the same as for the standard air f...
by lancia7550
08 Mar 2021, 22:39
Forum: 65 Fulvia
Topic: Float level 1.3 Fulvia
Replies: 8
Views: 1032

Re: Float level 1.3 Fulvia

Thanks - It is for S1 1.3 Rallye S, 818.303 engine.
PHH13 carbs, currently on car.

Go to advanced search