Berlina Valve Timing??
Posted: 07 Jun 2007, 22:40
Does the Berlina use different timing than that of other fulvia's? After changing rings on my engine we experienced these symptoms :
When the engine is at running temp it idles too high 2500rpm, idle speed screw at min.
Engine sluggish when holding the gas pedal 1/2 way down.
An 1970's lancia factory mechanic from my club cleaned and adjusted the carbs but no improvement...
I doubt if the problem lies at the carbs as the engine was running fine before replacing the rings.
Any advice?
When the engine is at running temp it idles too high 2500rpm, idle speed screw at min.
Engine sluggish when holding the gas pedal 1/2 way down.
An 1970's lancia factory mechanic from my club cleaned and adjusted the carbs but no improvement...
I doubt if the problem lies at the carbs as the engine was running fine before replacing the rings.
Any advice?