Hallo
Ich bin ein Phedra-Neuling und habe mir das Software Update 5.4 runtergeladen,
auf CD gebrannt und ins Radio gesteckt. (Zur Zeit habe ich 5.32) Es passiert aber nichts.
Wer kann mir weiterhelfen ?
Was mache ich falsch.
Gruß Hans
Software Update
-
Philipp
Re: Software Update
Wagen muß ausgeschaltet sein, CD einstecken und Zündung einschalten viel Erfolg
-
rossi
Re: Software Update
Anbei die Anleitung von Lothar - eurovan-forum:
http://www.eurovan2.com/modules/vbullet ... 031&page=4
Hi there,
When updating RT3 there are some things to keep in mind IMHO:
1. Keep the engine running until the system-CD gets out automatically
2. DO NOT DRIVE DURING UPDATING (hihi, I did with my 307cc and it worked as well without complain)
3. When writing the CD, use a high quality CD (I used Philips this time) and a high quality CD-Write (I used Plextor DVD-RW 708A with current firmware) and MINIMUM WRITING SPEED (I set up CloneCD to 2x, it wrote with 4x actually).
Regards,
Lothar
http://www.eurovan2.com/modules/vbullet ... 031&page=4
Hi there,
When updating RT3 there are some things to keep in mind IMHO:
1. Keep the engine running until the system-CD gets out automatically
2. DO NOT DRIVE DURING UPDATING (hihi, I did with my 307cc and it worked as well without complain)
3. When writing the CD, use a high quality CD (I used Philips this time) and a high quality CD-Write (I used Plextor DVD-RW 708A with current firmware) and MINIMUM WRITING SPEED (I set up CloneCD to 2x, it wrote with 4x actually).
Regards,
Lothar