Page 1 of 1
Clutch cover 2000
Posted: 30 Nov 2007, 14:30
by william
Does anyone know if the clutchcover for the 2000 (flavia) engine is interchangable with another more readily available (lancia/fiat) product? Like for example the Fulvia SII clutch us the same as lancia beta 1600 and Fiat uno.
Re: Clutch cover 2000
Posted: 06 Dec 2007, 09:24
by Colin
William, same as Beta 1800. Regards - Colin.
Re: Clutch cover 2000
Posted: 07 Dec 2007, 11:16
by william
Which in turn is the same as the beta 2L right?
Re: Clutch cover 2000
Posted: 07 Dec 2007, 16:44
by Colin
I believe not the same as 2.0
Re: Clutch cover 2000
Posted: 11 Dec 2007, 20:36
by william
Just had the opurtunity to compaire both 1800 and 2000 covers and they look exactly the same. the only difference i can come up with is the 2000 beta cover is stronger. I opted for the stronger 2000 as my Flavia 2000 engine is modified a bit.
Thanks again. Next problem is finding a new clutch release bearing. Any tips?
Re: Clutch cover 2000
Posted: 12 Dec 2007, 23:06
by Bert Ewalds
For the Lancia 2000, models 820.210/211/230/231 the correct bearing should be SKF 616524
Re: Clutch cover 2000
Posted: 13 Dec 2007, 19:04
by william vd Sman
I've checked the net and found out that that nr is not carried by SKF for years. Could it be the same as Fulvia?
Re: Clutch cover 2000
Posted: 13 Dec 2007, 22:56
by Bert Ewalds
Not very likely, the SKF cross reference list gives different numbers for the Fulvia bearings
I bought mine (Flavia 1800 Coupe) from Cavalitto, few years ago
Bert
Re: Clutch cover 2000
Posted: 29 Dec 2007, 01:19
by Jens
Dear William,
according to Sachs, Beta 1800 and a lot of other Lancia and Fiat models use the same clutch pressure plate. Beta 2000 will not fit due to larger dia 215 mm in sted of 200.
Take a look at the sachs web site for more info:
http://webcat.zf-trading.com/index.asp?SPR=4.
Just click on part no for crossref