Rocker profile for 63 Flavia Convert
Rocker profile for 63 Flavia Convert
Does anybody have the correct rocker panel profile for a 1963 Lancia Flavia Convertible and are there any sheet metal floor pans available?
-
- Posts: 653
- Joined: 17 Dec 2008, 20:12
Re: Rocker profile for 63 Flavia Convert
What is that?
Re: Rocker profile for 63 Flavia Convert
Isn't this also known as sill panel, on this side of the pond?
If there has been no trace from the original profile, then I guess there is a real hard-core project going on.
If there has been no trace from the original profile, then I guess there is a real hard-core project going on.
-
- Posts: 212
- Joined: 10 Apr 2009, 22:27
Re: Rocker profile for 63 Flavia Convert
have you tried Biondi Lamierati? Maybe they can help?
Re: Rocker profile for 63 Flavia Convert
Take a look of these interesting links:
https://www.flickr.com/photos/108595436 ... 736374754/
http://www.corbellinifratelli.com/foto/ ... gallery=10
https://www.flickr.com/photos/108595436 ... 736374754/
http://www.corbellinifratelli.com/foto/ ... gallery=10
Re: Rocker profile for 63 Flavia Convert
Thanks for the information. I am in the process of restoring my car and just finished the entire upholstery in black licorice leather and plan on sewing the convertible top this summer.
I need to do some serious patching to the body before installing the interior. Thankfully the car is not as bad as the one being restored on the web site
Brian
I need to do some serious patching to the body before installing the interior. Thankfully the car is not as bad as the one being restored on the web site
Brian
Re: Rocker profile for 63 Flavia Convert
That polish shop makes pretty impressive job with the poor thing. (tu) Wonder how the Flavia got into that condition, was it stored in a greenhouse or something... I've seen a Finnish S1 Berlina that has sit outside unused for 30+ years, and its condition was still far from that.