Page 2 of 2
Re: Aurelia B12 Shock rear shock absorbers
Posted: 27 Jul 2003, 11:06
by Norbert Dybus
Dear Karl Heinz,
why not indeed? I've thought of that. It's just that I have not been able to match "10mm2/sec" to anything offered for bikes. Have you used fork oil? Details? Does ist affect the old seals rear and front (reservoir).
Thanks for bringing up this matter.
Yours
Norbert
Re: Aurelia B12 Shock rear shock absorbers
Posted: 30 Jul 2003, 11:15
by Andreas
Hello Karl Heinz,
it could be that the oil for the fork of bikes is a possibility, too.
I believe that this could be a real chance to have easy the right
solution for the shock´s
But for me there wasn´t a reason to check it in detail.
Do you know somthing about the cost per liter.
best regards
Andreas
Re: Aurelia B12 Shock rear shock absorbers
Posted: 18 Aug 2003, 21:08
by Karl Heinz Hager
Cari Amici,
I use fork oil to top up the S/A fluid reservoir frequently, I did not get any problem during the last ten years. Recent cost was at 5.70 Euros for 500cc 10W from LiqiMoly, but I used other brands (Castrol for example) also. I don't know anything about the relation of the different unities for viscosity but in order to avoid valve failures on the S/A (that is lot of trouble) I don't use the "stiff" fork oil.
Regards, Karl Heinz.