Hi. I am looking for some help in finding how to connect the 4 wires to the
> back hatch window switch of a Fulvia sport Zagato prima serie (1968)
> The wire diagram I have, does not show the connections/colors/numbers to
> the pins on the back of the switch.
> I searched all over but no one has been able to give me such indication.
> Hope to find someone who is willing to take the time to help.
> Many thanks in advance.
> best regards
Back hatch switch connections fsz
Re: Back hatch switch connections fsz
Wait one or two days. Will make a pic of that to solve your problem.
regards Andreas
regards Andreas
Re: Back hatch switch connections fsz
Many thanks Andreas.
It will be of great help as I looked everywhere withoutany success.
I am very grateful.
Cheers
By the way, I have attached a picture of the back side of my switch.
It will be of great help as I looked everywhere withoutany success.
I am very grateful.
Cheers
By the way, I have attached a picture of the back side of my switch.
Re: Back hatch switch connections fsz
Not so easy as anticipated. Need to remove the dashboard.
Re: Back hatch switch connections fsz
Thanks for getting back to me.
Actually the switch can be removed just by pulling it as it has two snap clips in the back that hold it in position in the dashboard.
Of course, unless some necessary modifications had to be made during the years.
Anyway, if you are able to help fine if not, please just let me know.
I really appreciated your will to support.
In case you will need anything from my end just ask. My personal e-mail is: enrico.volpini@libero.it
Very best regards.
Enrico
Actually the switch can be removed just by pulling it as it has two snap clips in the back that hold it in position in the dashboard.
Of course, unless some necessary modifications had to be made during the years.
Anyway, if you are able to help fine if not, please just let me know.
I really appreciated your will to support.
In case you will need anything from my end just ask. My personal e-mail is: enrico.volpini@libero.it
Very best regards.
Enrico
Re: Back hatch switch connections fsz
Ciao Enrico,
now i found the time to remove the panel and hopfully to help you.
Contact 4 is white / bianco
Contact 2 is brown/ marrone
Contact 5 is black / nero
contact 1 is grey / grigio
now i found the time to remove the panel and hopfully to help you.
Contact 4 is white / bianco
Contact 2 is brown/ marrone
Contact 5 is black / nero
contact 1 is grey / grigio