ODB2, kann das jemand empfehlen?

[halber]

liebe gemeinde,
bei pearl.de gibts ein bluethoot-obd2-adapter für schmales geld.
obd2
kennt das teil jemand und kann es eventuelle empfehlen?
und: welche soft braucht man dann noch auf seinem android-gerät?
herzlichen dank für eure antworten!
jörg

[Qnkel]

Gibt es viel billiger und kleiner:

http://www.ebay.de/itm/200900329074

Habe den, funzt in meinem VW Touran wunderbar. Nutze "Torque", gibt aber verschiedene im Appstore.

[Mücke]

Mit den Programm kannst du nur die Fehler Löschen,nicht aber bei der Diva Analysieren,für bischen rumspielen reicht der Adapter,mehr aber auch nicht!

[vlad47]

As said many many times before, let's repeat once again. Don't buy it, it's a waste of money. Maybe it works in other cars, but not in thesis. This adapter is a bad revision that is not working correctly in any italic car. Novadays it's a problem to get a good one because now a new revision has come out (1.5) and there's a difference that on canbus there are missing two resistors and two capacitors. Instead of them, there's only one resistor between the canbus pins and in italian cars, this cause a problem as the canbus reading is not working any more. Only the kkl part on pin 7. The only correctly working revision is 1.4, but the problem is that the 1.5 is not certificated so also this new 1.5 is sold as 1.4 so you don't know what you are buying. Because of this I'm in touch directly with one producer of ELM327 adapters which is making for us an adapter specifically for italian cars.

[Qnkel]

Mit "Torque" kannst Dir auch diverse Live-Werte ansehen, die halt EOBD-konform sind.

Zum "analysieren" nimmt man eh kein trägen Bluetooth-Adapter und ein Smartphone sondern ein vernünftiges USB-Kabel und ein Laptop.

Und da fällt mir nur FiatMultiECUScan ein.

[vlad47]

I can analyze, read and erase errors, read actual values, execute procedures, tests and also make modifications in control units and much more than fiatmultiecuscan can imagine via bluetooth adapter and a mobile phone. So it's possible. All you need is the right tools.

[Qnkel]

Tell us about the right tools. I don't like secrets!

[Mücke]

Genau so siehts aus Vlad47,deshalb was ordentliches,Bluetooth ist bei mir nicht Träge..halber hast PN bekommen?

[halber]

pn bekommen und beantwortet

[vlad47]

There was a thread about an adapter and there I put a link for the adapter that is tested and 100% working. I can also manage you a discount (as I'm in touch with the producer).
Here's the bluetooth version:
http://electronic-fuchs.de/shop/article ... D1000-4%26
And well there are two ways of communication. Can bus and a direct one via a cable connected to the exact pin. Each car uses different pins for different control units, so those who has seen my adapter has mentioned that it's modified with a turnning know (switcher).