Ser I Semi cuscinetto
-
- Messaggi: 53
- Iscritto il: 17 nov 2009, 23:05
Ser I Semi cuscinetto
Gentlemen,
I need new Vandervell engine shell bearings :
con rod - big end bearings 82337309 (1st undersize) (complete set)
main bearings 82291585, 82291587, 82291591 (complete set)
Thrust bearing 82314721
can anyone help please ?
Greetings
Geoff
I need new Vandervell engine shell bearings :
con rod - big end bearings 82337309 (1st undersize) (complete set)
main bearings 82291585, 82291587, 82291591 (complete set)
Thrust bearing 82314721
can anyone help please ?
Greetings
Geoff
Re: Ser I Semi cuscinetto
Try to call CAVALLITO in Torino .
Ciao
Alfredo
Ciao
Alfredo
-
- Messaggi: 53
- Iscritto il: 17 nov 2009, 23:05
Re: Ser I Semi cuscinetto
Grazie Alfredo
Re: Ser I Semi cuscinetto
Materiale di escusiva fornitura officine di rettifica. Un semplice giretto per queste attività risolverebbe il problema. Un saluto cordiale. walter
-
- Messaggi: 53
- Iscritto il: 17 nov 2009, 23:05
Re: Ser I Semi cuscinetto
Grazie Walter
cordial greeting
cordial greeting
-
- Messaggi: 53
- Iscritto il: 17 nov 2009, 23:05
Re: Ser I Semi cuscinetto
I made telephone call to Guy Croft, his advice : re-use old ones if they are grey in colour.
Re: Ser I Semi cuscinetto
Visita questo sito:
http://www.bronzinespeciali.it/rigenerazione.htm
http://www.bronzinespeciali.it/rigenerazione.htm
In conclusione,a fare i corsaioli (mestiere che,quali siano i numeretti anagrafici, richiede, accanto al certificato USL di completa infermità mentale, la più totale giovinezza di cuore) non si invecchia!!
Re: Ser I Semi cuscinetto
Puoi guardare anche su ebay: BRONZINE BANCO STD LANCIA GAMMA 2000. Un saluto cordiale. Walter
-
- Messaggi: 53
- Iscritto il: 17 nov 2009, 23:05
Re: Ser I Semi cuscinetto
Grazie Deltagtie and Walter
Greetings
Greetings
Re: Ser I Semi cuscinetto
Dear Geoff
Did you have any luck with the bearing shells ? We also need new main bearings. I found them in San Marino, but very expensive.
Thank you. Felix
Did you have any luck with the bearing shells ? We also need new main bearings. I found them in San Marino, but very expensive.
Thank you. Felix