Fulvia Clutch
Posted: 21 Jul 2008, 13:42
Hi everyone,
I have a Series 1 Fulvia, right-hand drive. The clutch cable has to go thru' a big "s" bend to get from the clutch pedal to the clutch fork? on the left-hand side of the gearbox. I was wondering if it would be possible to move the clutch fork to the right-hand side of the gearbox to enable the cable to be straighter. There appears to be a blanking plug on the right-hand side opposite the mounting point for the fork. If it is possible, one would obviously have to modify the fork but what else needs to be done ?
Thanks
Steve
I have a Series 1 Fulvia, right-hand drive. The clutch cable has to go thru' a big "s" bend to get from the clutch pedal to the clutch fork? on the left-hand side of the gearbox. I was wondering if it would be possible to move the clutch fork to the right-hand side of the gearbox to enable the cable to be straighter. There appears to be a blanking plug on the right-hand side opposite the mounting point for the fork. If it is possible, one would obviously have to modify the fork but what else needs to be done ?
Thanks
Steve