International Lancia Forums

We have developed a thermostat which allows a higher flow than the original Flavia part. (higher nominal diameter and less pressure drop). Fits to the standard connection piece.

For further information please contact me personally.

Hubert

Is this also suitable for the Lancia 2000 ie?
Henk

I have successfully used an after-market, in-hose, thermostat in my Flavia 2000 coupe. It is held in place by an additional radiator clip. Go through a thermostat catalogue at your local spare parts shop and you will find one that suits. I drilled a couple of holes in the thermostat seat to ensure a little flow of water through the thermostat to allow it to sense the water's temperature.
Some thermostats already have these drillings.
Cheers Brian..