Page 1 of 1
Flavia and Fulvia steering joints
Posted: 24 Nov 2009, 20:41
by Michael Findlay
This is a message from the other side. I posted this request to the Flavia group last week but no response yet. Does anyone know if there is a seal kit for the old style series 1 Flavia/Fulvia steering swivel (the ball joint between the hub carrier and A arm)? Mine are okay but the dust seals are perished. If anyone knows of a good substitute I would be pleased to hear back.
Michael Findlay
Port Chalmers
Dunedin
1963 Lancia Flavia PF Coupe
Re: Flavia and Fulvia steering joints
Posted: 24 Nov 2009, 22:09
by Bart Verbeek
Michael
Take a joint to your local parts shop, maybe he has something that'll do the trick!
But, all major Lancia Flavia parts suppliers could deliver the replacement part for it.
greetings
Bart
Re: Flavia and Fulvia steering joints
Posted: 26 Nov 2009, 21:40
by Hein Reedijk
You can buy them on ebay.it as well.
Best regards, Hein Reedijk
http://cgi.ebay.it/CUFFIA-TESTINE-SOSPE ... 3084wt_957
Re: Flavia and Fulvia steering joints
Posted: 26 Nov 2009, 22:26
by Huib
Those on Ebay look like those which get hard quickly. Best get some universal ones from the local auto parts store of good silicone rubber. Don't forget to make a hole in them with a needle to let air and old grease out if your ball joints have grease nipples.