International Lancia Forums

Hi,

Please can someone confirm the diameter of the piston within the Dunlop caliper on the front of a 1969 Fulvia Series 1, 1.3S Rallye, is 2 1/8 inches and that new seals etc are available please.

Thanks
Steve

Confirmed Steve,
Fronts on your car are 2 1/8 inch (like all fulvia S1s) and rears on your car should be (make sure you have the remote servo) 22/16 (it reads 22 on the cilinder)=1 3/8"

And the seals are available from any of the sponsors of this forum

Thanks guys.
Regards
Steve