Delta Integrale, oil pressure?

Dan16vt
Posts: 3
Joined: 22 Jan 2009, 13:47

Delta Integrale, oil pressure?

Unread post by Dan16vt »

Hi, i've been to see a Delta Integrale 16v Turbo and I think i' m going to buy it. One thing thats bothering me though is the oil pressure, when it was warmed up and idling it was sat at just under 1bar (about 0.9,0.8). The moment I touched the accelerator though it rose quickly. Is this normal?

Dan.
evoluzione
Posts: 15
Joined: 27 Dec 2008, 23:05

Re: Delta Integrale, oil pressure?

Unread post by evoluzione »

Hola.
It depends on the type of oil of the engine.
¡¡ MIN 3bar a 3000rpm¡¡
Dan16vt
Posts: 3
Joined: 22 Jan 2009, 13:47

Re: Delta Integrale, oil pressure?

Unread post by Dan16vt »

10w40 synthetic, it was hitting 3 bar at about 2.5k rpm. Its been sold now so i'll have to find another. Is 0.9bar on warm idle too low?
evoluzione
Posts: 15
Joined: 27 Dec 2008, 23:05

Re: Delta Integrale, oil pressure?

Unread post by evoluzione »

The best oil for a delta integrale is:
Castrol 10w 60
selenia 10w 60
motul 300v competition 15w50
Dan16vt
Posts: 3
Joined: 22 Jan 2009, 13:47

Re: Delta Integrale, oil pressure?

Unread post by Dan16vt »

Right, thanks i'll bear that in mind.
Post Reply

Return to “57 Delta, Prisma, Delta Integrale”