Page 1 of 1

Flaminia PF coupe 2.8

Posted: 22 Jan 2008, 18:09
by Francois Feller
Hi,
Does anybody know a crossreference for the original air filter element
FISPA LI 2770 on my 826.030 engine ?
Thanks in advance for your help.

Re: Flaminia PF coupe 2.8

Posted: 27 Jan 2008, 22:47
by Bert Ewalds
Francois,

Your best bet is to go to a well sorted autoparts store with friendly staff at a quiet moment.
Take your original filter element, and ask them if they can find a close match.
That is at least how I found an alternative for the 3C air filter element.


Bert

Re: Flaminia PF coupe 2.8

Posted: 30 Jan 2008, 17:41
by steve read
Do you know the element part number/manufacturer?

Thanks.

Re: Flaminia PF coupe 2.8

Posted: 30 Jan 2008, 23:40
by Bert Ewalds
For the Flaminia 3C , I do, not for the 2B
For the 3 C it is FRAM CA 4595, for European Ford Granada and Sierra Diesel engines
It is slightly too big, so it will buckle a little bit

Bert

Re: Flaminia PF coupe 2.8

Posted: 31 Jan 2008, 00:15
by steve read
Thanks Bert. I found one on eBay.

Steve

Re: Flaminia PF coupe 2.8

Posted: 07 Feb 2008, 10:21
by Franco Manitto
Following your suggestion, I found a store surplus Fram filter (15€) . Considering that it was a bit large I cut away about 20 mm, and rejoined toghether by means of contact cement and 4 staples achieving a good fitting. Regards.