Page 1 of 1
Desperately need velocity stacks for 35 DCNL
Posted: 02 Oct 2003, 21:17
by Steve Read
I'm looking for a pair of them. Weber part 6809a, Lancia part 2198849. Does anyone know of any?
Thanks,
Steve Read
Re: Desperately need velocity stacks for 35 DCNL
Posted: 03 Oct 2003, 02:27
by Steve Read
Actually Weber part 6807a, Lancia part 2198850.
Re: Desperately need velocity stacks for 35 DCNL
Posted: 12 Oct 2003, 16:27
by George Z.
Hi Steve
You may want to check with the Italian company C.D.M. in Nichelino near Turin. Tel. + fax +39 011 680 9247 - but I have no idea whether they talk English!
The guy there has done a very nice job in renovating a 3C-setup. I've seen the shop when I picked up the carbs and it looked like there are still many original parts on their shelves.
Good luck + best regards,
George
Re: Desperately need velocity stacks for 35 DCNL
Posted: 16 Oct 2003, 18:20
by michele
A very good advice, he produces them himselve. Make a fax, because his English is very poor. Give him the technical information and you get the answeR. His name is Guglielmo Portelli.
Good luck
Michele
Re: Desperately need velocity stacks for 35 DCNL
Posted: 24 Oct 2003, 22:50
by Steve Read
Thank you very much for your help. I've sent him a fax just now.
Steve Read
Re: Desperately need velocity stacks for 35 DCNL
Posted: 01 Dec 2003, 14:02
by Andrew @ Omicron
We're making them as an investment castings.
They will be ready soon.
Re: Desperately need velocity stacks for 35 DCNL
Posted: 01 Dec 2003, 23:26
by Steve Read
Are you making the stacks or the venturi extensions? (I got confused with terminology; I'm no mechanic.)
Thanks.