International Lancia Forums

There has been a lot of curiousity about different cams used in the Aurelias. Much of the information in the US was compiled along with measurements of factory cams and factory drawings. An article on this can be downloaded at:

http://homepage.mac.com/geoffreyg/FileSharing14.html

Please feel free to read it, pass it along, and give feedback or corrections. By the way, any other cam information is more than welcome.

Thanks,
Geoff

Dear Geoff,

thank you very much for publishing your research. This is most interesting.
I shall try to measure my B12 cam and valve-gear when winter comes.

Thanks again,
Norbert