Page 1 of 1
Distributor advance weight lubrication
Posted: 29 Dec 2022, 20:27
by Ulver2002
I have a series 2 Fulvia. Should the distributor advance weights be lubricated (with grease or ?), or is it best to keep them dry?
Re: Distributor advance weight lubrication
Posted: 12 Jan 2023, 16:28
by bmarler
i see nobody has replied to your question. i lubricate mine. i see no reason not to. i either use a small amount of silicone grease or dry moly spray. just be careful not to foul the points, (if you still have points installed)
Re: Distributor advance weight lubrication
Posted: 26 Jan 2023, 20:56
by Ulver2002
Thanks for your response.
Re: Distributor advance weight lubrication
Posted: 03 Feb 2023, 09:27
by Huib
Good idea to slightly grease the weights
In the base plate is a small hole with olio written next to it. Olio is Italion for oil. Put a few drops there too. Most likely no one put any oil there for the last fifty years.