Page 1 of 1
Parts needed for Flavia 1800: oil filter unit
Posted: 31 Jan 2017, 19:08
by Sami_san
Hi,
I'm looking for oil filter unit complete for Flavia. If someone have a sell, please contact.
Thank you,
Sami
sami.santti@gmail.com
Re: Parts needed for Flavia 1800: oil filter unit
Posted: 06 Feb 2017, 22:09
by pfasips
Hi Sami,
what engine exactly?
do you need the aluminium part bolted to the engine-block?
I've got some flavia-engines in parts, can check for you.
greetz Patrick
Re: Parts needed for Flavia 1800: oil filter unit
Posted: 17 Feb 2017, 01:36
by Sami_san
Hi Patrick,
Engine is 1800cc but in my understand there is same oil filter unit in 1500cc and 2000cc engines. I actually looking for the oil filter unit complete, so aluminium part and filter housing.
Regards,
Sami
Re: Parts needed for Flavia 1800: oil filter unit
Posted: 17 Feb 2017, 09:10
by LanciaFin
Hello,
I guess Sami is building an Fiat Abarth 600-replica? I don't know what type of filter housings were used in those, but I'd guess it was the earlier type for 1800-engines with oil cooler and cartridge-type filter, not the later spin-on-type used on late 1800 and Flavia 2000?
Here is a picture of the later spin-on-type:
https://1drv.ms/i/s!AiQwQq0Hz81SgZkUYHk-74dUdDyGGA
1500 didn't have oil cooler, and as far as I know, neither the 2000 (whereas Flavia 2000 did.)
Best regards,
-Miika