International Lancia Forums

Looking for pictures of the fuel and brake line attachment points along the passenger side under the rocker for a 1963 Lancia Flavia convertible. Thanks

Perhaps in the partsbook, DVD available on this website

I don't have a picture available right now but it's a quite simple to describe; both piping are routed together in the internal slot aside the passenger rocker (so in order to be partially protected); they are hold every about ~250mm by ~10mm iron folded stripes soldered to the body.

Can you send me a sketch of the internal slot? Is the internal slot part of the floor pan as shown on attached picture?

Does the attached picture show the correct fuel/brake line routing? Circles indicate where the metal hold down straps are located.

Hello,

I don't know if this will help, but this is how they are routed in Flavia Milleotto:
https://onedrive.live.com/redir?resid=5 ... =folder%2c

Have you sorted that problem in the meantime? If not I could take photos of my convertibile.

Hubert

Hubert,

I am all set. The information that the guys sent me was enough to get it right.

Thanks,

Brian