International Lancia Forums

Hello,

I'm still looking for some parts for my Flavia Milleotto. If you can sell any of these, in any condition, please contact:
- Matador side view mirror, like this: http://www.autobelle.it/annunci/vendo_s ... 188401.php
- The metal pipe from heater and thermostat to water pump (nr 7 in next picture, fastened with 2 bolts), fan bracket (nr 18), hose bracket (that holds hose nr 12):
https://onedrive.live.com/redir?resid=5 ... hoto%2cjpg
- Cigarrette lighter (lighter only, no need for socket.)
- Original Fiamm Roadmaster horns including their compressor.
- Spare wheel cover

As far as I know, the pipe and fan bracket are specific for series 2 Flavia only. However, a pipe from series 1 may also do if I cannot find the proper model - it should be possible to make it fit.

Best regards,
-Miika

Ok, most of the parts I need are more or less coming, but something is yet missing. At first, the mirror that was linked in the previous message, was not the correct one. I learned that when I received one from Ebay... Anyway, here is the correct model, or its base (actually the base would be sufficient, because I now have the suitable mirror pot):
https://onedrive.live.com/redir?resid=5 ... hoto%2cjpg
My Flavia has had two mirrors (Swedish export), that's why I'm still looking for yet one.

Cigarrette lighters seem to be prone to get lost, as many cars seem to miss them. I still don't have one either. Probably Fulvia Coupe has the same part.

I now have "original look and feel" Fiamm horns, but the compressor is still missed. All horns from dismantled Flavias seem to end up in Ebay as Ferrari-parts, priced as such.-D

If someone could provide a close-up picture from the original spare wheel cover, then I could try to find a correct material for making a repro.