International Lancia Forums

Hi,
Can anyone tell me what size the front hub nuts are on a Dedra 2000ie?

Fanx, Leo

Hi Leo
It's shown in Dedra Technical Data as- Front Wheel Hub to Steering Knuckle fixing, nut is a M22x1,5 & tightening Torque is daNm 32.

Hope this helps.

Brian Hilton
LMC Dedra Advisor

Thanks Brian,
I reckon that the nuts are 36mm across but am having to get a socket "turned down to fit inside the rim of the hub.

Best regards, Leo

Hi Leo,
Yes its a 36mm socket that fits but it needs to have a thin wall so as to fit into the recess.

Leo

A bog standard 'impact' socket (Black ones) fits inside the hub on my Dedra Turbo. I don't know if its the same size as the 2 litre but I would assume it is.

Thanks Mick,
Is that a 36mm socket?

Leo