International Lancia Forums

General question on the Delta Integrale wheels as shown here:
http://www.viva-lancia.com/lancia_forsale/marti-evo.jpg

Was this style wheel ever offered with a 4 bolt x 98mm wheel pattern?

Additionally, was a similar style offered on the 'New' Delta that was sold in the late 90's?

Could anyone email a photo?

Thank you
Keith Walker
vze3sngp@verizon.net

These wheels were avaliable on Integrales as 15"x7" on the Evo1 and 16"x7,5" on the Evo2 -all with five bolt pattern (5x98).

There was a similar type of wheels on the Nuovo Delta HPE special edition "Evo500". These actually had the four bolt pattern (4x98). I'm not sure about the dimensions on these wheels, but I hope an Evo500 owner will add that info soon...

Check out this nice Evo500 with original wheels:
http://lancia.mer.nu/gallery/view_album ... me=preapus

And my Evo2 btw...
http://lancia.mer.nu/gallery/view_album ... me=stratos

Fredrik,

Thank you for the information!

I have a Lancia Scorpion in the USA (nee' Montecarlo) and would wish to install 'Integrale' wheels, but with 4x98 bolt pattern.

My Lancia Compact Parts CD list wheels in the following sizes for the New Delta (4x98):
6.5x15
7.5x16

Now I wonder how much they cost and whether they are available?

Keith Walker

my understanding is that they cost about £100 each including uk sales tax, be careful as you need to check that the offset is compatable I have a delta hpe (7.5 x 16 wheels) and can check the offset if you want