RE: Help Needed,
Posted: 09 Dec 2002, 10:12
I have finally (after a 9 week wait) received the turbo and coolant hoses from Samco. I went to fit them and came up with one problem. The Top turbo hose from samco have a pipe coming off of it for a dump valve to be fitted.
This is good apart from the fact that the original turbo hose I have on the car has been cut and a dump valve fitting kit added. The Kit has a bottom pipe for a brather pipe from the engine to be added, along with the normal pipe for the Dump Valve to go into.
Anyway I need to know where this breather pipe will have to be connected if I dont have the kit as I dont want to have to cut the Samco's (and if I do Ill have to have 2 dump valves).
As far as I know the breather pipe is coming off of the cold start area for the engine.
SO IF ANYONE COULD HELPO IT WOULD BE MOST APPRECIATED.
Regards
Carl
This is good apart from the fact that the original turbo hose I have on the car has been cut and a dump valve fitting kit added. The Kit has a bottom pipe for a brather pipe from the engine to be added, along with the normal pipe for the Dump Valve to go into.
Anyway I need to know where this breather pipe will have to be connected if I dont have the kit as I dont want to have to cut the Samco's (and if I do Ill have to have 2 dump valves).
As far as I know the breather pipe is coming off of the cold start area for the engine.
SO IF ANYONE COULD HELPO IT WOULD BE MOST APPRECIATED.
Regards
Carl