International Lancia Forums

Hi, you are doing too much complicated. Don't use any iso or other cable. Just let the changer connected and only cut the audio cables from it. So in the connect you turn the changer on and it starts, only the audio won't be from it but from your computer. My external sound card has cinch co I have soldered a cable with cinch there and other cable with highjack (3,5 mm) for the input to the computer from the changer. Extracting the changer was a mistake, put it back

Amici, can somoeone point me to a person who'd organize me this?
https://www.youtube.com/watch?v=7042xN37f-0

Hm I thought about that but what if my CD Changer doesn't work or partially doesn't work? I mean it recognizes the changer but it doesn't read CDs (always "No CD").. Am I right, that in this case this solution doesn't work? If my assumption is right, I'll have to buy the loudlink cdc Emulator..

Looks nice, but I think he changed the Display and you Need some Kind of KVM-Switch to Switch between the Android PC and the original Thesis Connect.. If you understand german, you can start here:

http://www.thesis-treffen.de/index.php/ ... arpceinbau

You want to DIY or you are searching for someone to modify it for you? This will be a lot of work, I think vlad47 is the Guru on this Topic

Hallo Gregorio,

ich habe dir vor langer Zeit auf dein Video bei Youtube geantwortet,kam aber keine Rückmeldung von dir.Wäre nett wenn du dich mal per Privat Nachricht bei mir meldest danke!

Mücke schrieb:
-------------------------------------------------------
> Hallo Gregorio,
>
> ich habe dir vor langer Zeit auf dein Video bei
> Youtube geantwortet,kam aber keine Rückmeldung
> von dir.Wäre nett wenn du dich mal per Privat
> Nachricht bei mir meldest danke!

Ups,jetzt erst richtig gelesen das du den Salvatore Macri auch suchst!Post kann gelöscht werden von mir!Sorry

I know the question is a bit stupid but did you put the cd upside down? Because that is the correct position.

No, this ain't a stupid question and the first time I tried the changer, I did put it in the wrong way.. But after reading the Manual I tried it with the Label down and it didn't work either.. So I don't know whats wrong with the charger but I think for your solution the changer has to be working and a CD has to be running.. So last week I ordered the Loudlink box, which should do the trick..

Btw. just changed the arm rest, so much fun

Yes you are right, if you want to do it the same way I did your changer needs to be working. If using loudlink than it has directly a highjack input
I know exactly what the armrest change means hh.