Hello,
I am looking for the following original items and happy to pay a realistic price. Thank you very much for any advice.
Best regards
Flami
- 4x front and rear bumper guards/horns from mild steel in used but undamaged condition. Possibly also for rechroming
- 5x chromed wheel rings in used but undamaged condition
Spare parts wanted for Flaminia GT
-
- Posts: 255
- Joined: 01 Oct 2009, 14:49
- Location: Calvados/ Normandie / France
Re: Spare parts wanted for Flaminia GT
Hi,
Classic parechocs in France propose a complete set front and rear bumpers. for Flaminia Touring, you can contact them for your specific request :
http://www.classic-parechocs.fr/fr/lanc ... hocs-.html
If I remember well, wheel rings are(were) also available (new) on the net (in Italy I presume). Have a look at eBay. The price for a set (4 pièces) is near 160 / 200 €.
Notice than, usually the set in for only 4 parts, the spare wheel don't have a ring.
Searching for you :
https://www.ebay.fr/itm/4-ANELLI-RUOTA- ... 2cbef40e6a
Best regards,
Pierre
Classic parechocs in France propose a complete set front and rear bumpers. for Flaminia Touring, you can contact them for your specific request :
http://www.classic-parechocs.fr/fr/lanc ... hocs-.html
If I remember well, wheel rings are(were) also available (new) on the net (in Italy I presume). Have a look at eBay. The price for a set (4 pièces) is near 160 / 200 €.
Notice than, usually the set in for only 4 parts, the spare wheel don't have a ring.
Searching for you :
https://www.ebay.fr/itm/4-ANELLI-RUOTA- ... 2cbef40e6a
Best regards,
Pierre
Aurelia B21, Flaminia GTL, Flavia Milleotto, 2000 coupé,
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0
Re: Spare parts wanted for Flaminia GT
Hello,
For wheel rings:
http://www.autoricambisassi.it/componen ... gory_id=80
Best regards
François
For wheel rings:
http://www.autoricambisassi.it/componen ... gory_id=80
Best regards
François
François
Re: Spare parts wanted for Flaminia GT
Hello,
My best wishes for the new year 2018 and thank you for your reply. What are your thoughts about the shape and fitting of the remanufactured wheels rings, in comparison to the originals ? Are there differences ? Thank you for your advices.
Best regards
Flami
My best wishes for the new year 2018 and thank you for your reply. What are your thoughts about the shape and fitting of the remanufactured wheels rings, in comparison to the originals ? Are there differences ? Thank you for your advices.
Best regards
Flami
-
- Posts: 255
- Joined: 01 Oct 2009, 14:49
- Location: Calvados/ Normandie / France
Re: Spare parts wanted for Flaminia GT
Hi,
When I bought may car (23 years ago) it was fully restored including wheel rings. So, I am not sure that these rings (still on my car) are the original ones.
There are in standard steel but chromed. Due to usage, rain, durst brake .... after 23 years, the chrome in not in good condition.
So I decided to buy the new current rings (160 € for brand new is probably not more expensive than the re-chrome operation of the complete set).
The new rings are in stainless steel, so I presume of better quality than chromed steel.
At the moment, there are not in place on the wheels but look fine.
Attach, two picture of the "old" ring (complete and detail) and a picture of the new one I know ... a screw is missing on the current ring at the top.
Hope this helps,
Pierre,
When I bought may car (23 years ago) it was fully restored including wheel rings. So, I am not sure that these rings (still on my car) are the original ones.
There are in standard steel but chromed. Due to usage, rain, durst brake .... after 23 years, the chrome in not in good condition.
So I decided to buy the new current rings (160 € for brand new is probably not more expensive than the re-chrome operation of the complete set).
The new rings are in stainless steel, so I presume of better quality than chromed steel.
At the moment, there are not in place on the wheels but look fine.
Attach, two picture of the "old" ring (complete and detail) and a picture of the new one I know ... a screw is missing on the current ring at the top.
Hope this helps,
Pierre,
- Attachments
-
- img_2292.jpg (33.61 KiB) Viewed 909 times
-
- img_2293.jpg (26.85 KiB) Viewed 909 times
-
- img_2291.jpg (31.32 KiB) Viewed 909 times
Aurelia B21, Flaminia GTL, Flavia Milleotto, 2000 coupé,
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0
Re: Spare parts wanted for Flaminia GT
Hello Pierre,
Nice and thank you for your reply. On my car there are still the first ring set. If I am not in a mistake, the material looks to be relatively thin chromed brass. There are several sources to purchage new rings. Do you know if there are different qualities on the market ?
Best regards
Flami
Nice and thank you for your reply. On my car there are still the first ring set. If I am not in a mistake, the material looks to be relatively thin chromed brass. There are several sources to purchage new rings. Do you know if there are different qualities on the market ?
Best regards
Flami
-
- Posts: 255
- Joined: 01 Oct 2009, 14:49
- Location: Calvados/ Normandie / France
Re: Spare parts wanted for Flaminia GT
Hi,
Thickness is near 1 mm. Usual for this kind of object.
Not sure of course, but there is probably only one manufacturer. And probably too,, the manufacturer does à batch of rings and then stop manufacturing since ... several more requests,
The addess given by Georges (dupont) is the same vendor that the eBay link I sent. The current price is 160 € without cost delivery.
Pierre.
Thickness is near 1 mm. Usual for this kind of object.
Not sure of course, but there is probably only one manufacturer. And probably too,, the manufacturer does à batch of rings and then stop manufacturing since ... several more requests,
The addess given by Georges (dupont) is the same vendor that the eBay link I sent. The current price is 160 € without cost delivery.
Pierre.
Aurelia B21, Flaminia GTL, Flavia Milleotto, 2000 coupé,
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0
Beta HPE, Beta Trevi VX, Prisma 1.6, Kappa coupés 2.4 & T20, Thesis V6 3.0