Outer wiper mount

[bmw8890]

Does anyone have a picture of the Lancia Flavia Vignale outer wiper mounting bushing? Attached picture is the inner mounting bushing and I assume the outer is similar but slightly shorter in height. What is the finish, chrome or polished aluminum?

Thanks,

Brian

[bmw8890]

Attached is a cross section of the wiper mount assembly and what I think the outer wiper mount should look like

[grifo63]

Ciao bmw8890, attached the wiper assembly exploded view and the outer pivot for your reference. I don't remember exactly the finishing but it should be chromed aluminium.

In case in a couple of weeks or so I can better check and provide a detailed picture

[bmw8890]

Thanks,

I have a parts book so I have the same pictures. Attached is a drawing that has the assembly and part dimensions of what it might look like.

Brian

[bmw8890]

Hello Grif063,

Just checking to see if you got a chance to take pictures of the outer wiper mount. Some measurements would be nice to have also.

Thanks,

Brian

[grifo63]

Hi, to be honest I forget to do it. If not so urgent I should manage to take a picture within 2..3 weeks, my cars are not near where I normally live.

[grifo63]

Hi bmw8890, as I promised please find attached some wipermount pictures.

[bmw8890]

Thanks for the pictures with the measurements. I have updated my CAD model and a friend is going to 3D print the part so I can do a fit check. Next step will be to figure out the best way to fabricate the real part.

Brian

[bmw8890]

Attach files show the 3D printed outer wiper mounts in the assembled state for a assembly fit check. Need to make some minor adjustments but overall a good fit and the geometry is very close to the original part. Next phase is to machine parts using a 3 axis CNC machine then polish followed by chrome plating. If anybody is in need for the same part let me know and we can work something out.

Thanks,

Brian