Page 1 of 1

Zylinderkopfschrauben / Aurelia B10

Posted: 16 Feb 2014, 22:00
by iwc852

meine kürzlich erworbene B10 hat vor nicht allzulanger Zeit eine komplette Motorrevision bekommen. Leider weiß ich nicht ob die Kopfschrauben schon nachgezogen worden sind.
Nun bin ich auf der Suche nach dem korrekten Drehmoment und die Reihenfolge um die Kopfschrauben nachzuziehen. Für jeden Hinweis bin ich dankbar.

Danke & Gruß,

Re: Zylinderkopfschrauben / Aurelia B10

Posted: 18 Feb 2014, 00:11
by lucasgeheniau

Hope this helps.



Re: Zylinderkopfschrauben / Aurelia B10

Posted: 20 Feb 2014, 21:00
by iwc852
Thanks a lot for your help, Lucas


Re: Zylinderkopfschrauben / Aurelia B10

Posted: 20 Feb 2014, 22:50
by lucasgeheniau
The Aurelia berlina's are some what favorite to me.

Long ago, we (me, my brother and my current neigbor and family) collected a B12 in Edinburg, Scotland.(Deans Park Crescent was the address I think)
We towed her all the way to the Netherlands and I was driving(?) the B12, the towing car was a Blue Lancia, Lancia Flavia 2000 LX belonging to my brother.

There were two engines on the back seat, no one in front. :) We had to adjust the steering rods to be able to drive faster than 30 km/h

When the Flavia drove on the ferry, the customs officers at that moment realised there was a tow... X(
No problems, so after a good landing at Zeebrugge we went home.

One of those happenings one never forgets!!! :)-D

Viva Vincenzo !!