Bleeding super duplex part. 3
Re: Bleeding super duplex part. 3
The springs are swapped.
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
OK. HOw can I separate them from one another, they look and feel just the same? can you say what is the inner and the outer spring?
Re: Bleeding super duplex part. 3
The middle one is longer. The outer one is made of thicker wire.
Can you also post high quality pictures of the plungers taken from the side.
Can you also post high quality pictures of the plungers taken from the side.
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
Just measured them and you are right they are not the same length - question is now wich one to place where?
Re: Bleeding super duplex part. 3
The longer one has to be in the middle.
The one with the thicker steel wire is the shorter one. It has to be at the end.
The one with the thicker steel wire is the shorter one. It has to be at the end.
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
I Understand. I measured the wire and there is maybe 1/10 mm. Difference between the two springs.
I will post a picture of the plunger tonight
I will post a picture of the plunger tonight
Re: Bleeding super duplex part. 3
That is Lancia for you. Precision.
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
I humbly agree that
Now with pictures
[attachment=1]34FE824E-0165-4B39-BADF-600FE8531A26.jpeg[/attachment][attachment=[attachment=0]B0121E65-BA59-4177-BE10-61A275F9282C.jpeg[/attachment][attachment=1]34FE824E-0165-4B39-BADF-600FE8531A26.jpeg[/attachment]
Now with pictures
[attachment=1]34FE824E-0165-4B39-BADF-600FE8531A26.jpeg[/attachment][attachment=[attachment=0]B0121E65-BA59-4177-BE10-61A275F9282C.jpeg[/attachment][attachment=1]34FE824E-0165-4B39-BADF-600FE8531A26.jpeg[/attachment]
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
Unfortunately I cannot get the pictures into the post in higher resolution - sorry [attachment=1]B7EE22B7-F1BA-4380-BEC1-00AD3FB69E65.jpeg[/attachment][attachment=1]B7EE22B7-F1BA-4380-BEC1-00AD3FB69E65.jpeg[/attachment]
-
- Posts: 69
- Joined: 18 May 2016, 22:06
Re: Bleeding super duplex part. 3
Everything reinstalled- trying to bench bleed. Oil coming out of the front outlet port but not from the rear one?
Seems as if the front plunger is working very well but why can’t I get any oil out of the rear port when pressing the piston?
Seems as if the front plunger is working very well but why can’t I get any oil out of the rear port when pressing the piston?