Hey, Giovanni. That is me sitting on bench. Nice picture. Piazza Maggiore, Mondovì, Piemonte. Thanks.

Hi tag89. Congratulations. Very good car. I own a 1967 Rallye 1.3 myself. I like your idea's. Very recognizable. Mine were similar when I changed from a Lancia Thema Turbo 16V to a Fulvia in 1996. I have driven Fulvia's for over 30 years (also counting the sixties and seventies) and learned a lot. L...

No need to replace seal if not leaking.

You don't need to balance the flywheel. To adjust the pressure plate the pressure plate has to be bolted to the flywheel with the disc sandwiched in between. Also the table inside the flywheel may have to be skimmed.

If no strands on the cable are broken, leave the cable. Otherwise replace it. I can either take out the engine or take out the gearbox. Not much difference on NEW cars. There is a Lancia book listing times for different jobs. Today I can type the number of a car into a computer and it gives the exac...

It sits where the red arrow points. It is all the way down in the cylinder block. Not really hidden but if I ever forget to take out a bolt, this would be the most likely candidate.

Long time ago that I did that job. I think you can do it if you remove the air filter housing.

Several options: 1. Eat a lot of spinach 2. The 5 people method. Two hold the table in place. Nr 3 holds the tool on the nut. Nr 4 puts an extension on the tool and applies fource. Nr 5 hammers the nut. Remember that small guy with big hammer achieve more than big guy with small hammer. 3. Use a hal...

Hi Mark

First time I see one on such a bad condition. We would reproduce or repair such a part.

Mooi, Hein.

Verzinken kun je makkelijk zelf doen.
https://drgalva.nl/