No idea if any help at this point but here goes. I have a 1969 S1 Fulvia Coupe which was too low. Omicron have fitted correct springs as it turned out it had a set of specials from UK maker which lowered it. I have these in garage if you want them as I will never use them - car is for rallying and ...

An update.. I did not realise that the centre button flashed the lights and the outer centre did the horn. So that helps massively as it explains why the centre wire from steering shaft doesn't sound the horn :D And in a further complication turns out the horn button that came with the new wheel is ...

Evening all Having some issues fitting my momo wheel, has a BG boss specific to the Fulvia (although seems to come with two horn rings) All goes on fine, there is wire coming through the shaft which is a live I assume the wire on the boss was the earth, connect to the two terminals on the horn, when...

update in case anyone else is looking for answers to same questions: The light switch is broken - new one being ordered, about 90eur cover is missing, replacement 30eur. both from oldlanciaspares.com becoming a regular customer of theirs... :D also set about flushing rad out - needs new rubber mount...

had a good day of working on it - new points & condenser, leads, dis cap, plugs to be done once I have a thin wall plug socket. far easier working on/under/behind the dash with the seats out as well. Whilst I was busy cleaning up the earth point I noticed there is apparently a cap missing..? bas...

evening all, had a fun day getting the dash out of the Fulvia, replacing the cracked old one and giving everything a good clean. I have a question on the switches... 3 rocker ones, first is blank, unused. second blower and then wipers, all fine. Then the knob on far side is the manual pump for winds...

I thought replacement to electronic was if it had been changed to elec ignition?

Or is it prudent to change anyway?

right, better not take that off then

After a bit of a trek from Sicily my Fulvia is now carefully tucked up in NL. So the negatives... Having started fine at collection it's now running horribly - down a cylinder I think. Seemingly hasn't enjoyed days on a truck in the pouring rain. Have a new dis cap, points, condenser, leads, plugs t...

may also explain why the suspension is about as high as my defender