Hi - forgive me if this is not the place to advertise this. I have just sold my Fulvia and retained it's registration number TOI 689. Perfect for a Lancia - TO being the prefix for cars from Torino the home of Lancia. I will let it go for £1200 which is very good value compared with any other TOI pl...

Hi - Obviously it would be more awkward but is it possible to remove/replace a rear leaf spring shackle pin bush without removing the spring first (rear end of spring). Any tips for this most welcome and if not possible then tips for spring removal.
Many thanks,
Phil

Sorted. The bulb on the bad side had a dark patch on it so I swapped it with the other one - hey presto they now both work fine!

Hi - the tail lights on my car work perfectly and with the tail lights off the brake lights work. But when the tail lights are on the left hand brake light does not work. I'm guessing it's an earth problem but I'm not sure where to find the earthing point. Any help would be greatly appreciated. Many...

Hi - what coil is suitable for 1973 1.3S Fulvia with standard points set up please? My current one is unmarked.
Many thanks

OK, thanks Huib - yes the car is level. I'll leave at the 4.4 litres then if that is correct.

Hi, Would the sump on a Fulvia 3 Monte-Carlo be different to a normal 1.3S? My handbook states a capacity of 4.3 litres but I have put 4.4 litres in so far and it is still below the max mark. Or maybe it is the oil filter? I have fitted a Mann W940/1 - is that bigger than an original filter would ha...

Hi - like you I'm no electrical expert but I've found that it's worth checking all the earth connections before delving into other stuff too deeply.

OK, many thanks - what do you recommend then?

Hi, Sorry me again! Now looking at oil filters. Have seen that the Mann W940/1 is listed as having 1 anti return valve with an opening pressure of 1.2 bar. Another filter that apparently fits is a Mann W940/20 that has 2 anti return valves that open at 2.5 bar. Is this stuff important or will either...